Closed flare systems

It is customary to use closed flare systems for smokeless burning of hydrocarbon gases and gas condensate mixtures near the ground surface. The equipment is applicable if there are continuous, emergency or intermittent discharges at the industrial facilities of a city. It is also used at industrial gas and oil treatment facilities.

A closed flare system ensures maximum efficiency of burning and minimum emission of hazardous combustion products. Advantages of this equipment also include: quietness, no heat radiation and safe disposal of burned gases. One more advantage is that the possibility of visible flame generation is eliminated during the use of the closed flare systems. Besides, closed flare systems do not need forced feed of steam and air to the combustion zone.

закрытые факельные системы

закрытые факельные системы

Advantages of closed flare systems

Closed flare systems manufactured by the Joint-Stock Company ModulNefteGazEngineering ensure clean and effective burning of any gaseous waste. Our equipment disposes of waste without smoke and visible flame. Specialists of JSC MNGE are ready to design closed flare systems taking into account individual requirements and specifications of the Client.

Our closed flare units are ready for stable operation under very different climatic and weather conditions. Advantage: soot-free burning of waste without supply of steam, compressed air or other auxiliary fluids. When you decide to buy closed flare systems manufactured by JSC MNGE, you can also count on a wide range of flow rates for the burned product, no heat radiation and safe process of disposal. The following shall be noted among other advantages of the closed flare systems manufactured by the Joint-Stock Company ModulNefteGazEngineering.

  • Low and controlled discharges;
  • Easy control system with convenient access to controls;
  • Convenient maintenance of all nodes of the system;
  • No thermal plume.

Closed flare systems of JSC MNGE are fitted with a flare stack, a tip, an automation system ensuring automatic ignition and flame control, ladders, maintenance platforms, a gas knockout and a drain drum.

How to select a closed flare system

Specialists of JSC MNGE recommend to take into account the temperature, density, pressure, speed and corrosiveness of gases. It is also important to take due regard of the requirements for a closed flare system capacity level. One more criterion is operating conditions of the system.

If you have difficulties selecting a suitable option of this equipment, you can apply to specialists of the Joint-Stock Company ModulNefteGazEngineering who are always ready to help and recommend an optimal solution.

Advantages of placing an order with JSC MNGE

An order of closed flare systems in the Joint-Stock Company ModulNefteGazEngineering makes it possible to get high-quality, safe and technically sophisticated equipment for operation even in the most severe operating conditions. We are ready to deliver a closed flare system to the place of installation, install it, commission it and ensure its further operation.

You can ask a question or place an order for a closed flare system by phone +7 (347) 216-10-01 (ext. 104) or on the website of our company.

МодульНефтеГазИнжиниринг Контакты:
Адрес: Рихарда Зорге, 75 450075 Уфа,
Телефон:+7-347-216-10-01, Электронная почта: